Understanding the Detrimental Nature of Dislocations in Layered Cathode Active Materials II

Methods

We have mainly applied density functional theory (DFT) calculations using the Vienna ab initio simulation package (VASP) to optimize atomistic models and to calculate their electronic structure, total energies, forces and stresses. Initial models containing dislocations have been generated using the Babel package.

Results

The thermodynamics of layer gliding in LiCoO₂ and LiNiO₂ was investigated by performing solid-state nudged elastic band simulations by applying rigid gliding shift to the material. We find that both the gliding barrier (similar to the unstable stacking fault energy) as well as the stacking fault energy decrease with decreasing lithium content. The stacking fault energy becomes even negative towards 0% lithium content for both materials. In the case of LiNiO₂, we also investigated how point defects influence the stacking fault energy by introducing an extra nickel in the lithium layer. At 0% Li content, 2% extra Ni has a similar effect on the barriers and stacking fault energies as a Li content of approximately 11% to 15%. Next, different models containing a dislocation dipole of screw dislocations for the two layered transition metal oxides were generated and treated within density functional theory. The excess energy of the dislocations are 0.83 and 0.48 eV/Å for LiCoO₂ and LiNiO₂, respectively. Additionally, also the fully delithiated materials were taken into account, resulting in excess energies of 0.30 and 0.40 eV/Å. Generally, full dislocations are able to split into two partial dislocations which reduces the energy of the system. The two partial dislocations then span a stacking fault. In our models, a splitting of the dislocations has also been observed after an advanced structural identification tool had been developed. Furthermore, we calculated defect binding energies between the dislocation and lithium and oxygen vacancies. For LiCoO₂, both defects show overall negative binding energies. A comparison to elasticity theory (for which binding energies are obtained from strain and calculated defect dipole tensors) shows that inelastic contributions (only properly represented in density functional theory calculations) are responsible for the non-zero
binding energies. For LiNiO₂, the binding energies follow a much more complicated pattern mostly alternating between positive and negative values. Again with the highest values are observed close to the dislcoation cores. Finally, as a first step towards understanding the generation of dislocations calculated surface energies of differently oriented surfaces. Based on these, a surface phase diagram was constructed and the particle morphology is predicted as a function of the chemical potentials for the atomic species. The different chemical potentials are motivated by different synthesis conditions (mainly temperature and oxygen partial pressure).

Discussion

The results of the layer gliding indicate that phase transitions with layer gliding are more likely to be observed towards low Li content. Moreover, at a Li content close to 0%, stacking changes are even thermodynamically favorable. In the context of the dislocations, the mechanical properties and elasticity theory can be used to understand one contribution to the difference in excess energies. Another contribution for LiNiO₂ has been identified to relate to its Jahn-Teller distortions: We found that the Jahn-Teller distortions couple with to the high strain close the dislocation core. In this region, a reorientation of the Jahn-Teller distortions from its conventional zig-zag ordering to collinear regions is capable to take a portion of the strain, which lowers the excess energies considerably. For the delithiated material (NiO₂) this is not possible because Jahn-Teller distortions become negligible due to the changed electronic structure of the Ni ion. The mostly negative binding energies of the vacancies in LiCoO₂ indicate that an agglomeration of vacancies in the vicinity of the dislocation is favorable, potentially accelerating unwanted phase transitions. For LiNiO₂, the more complicated patterns seem to relate to the locally differently oriented Jahn-Teller-distortions.

Additional Project Information

DFG classification: 406 Materials Science
Software: VASP, GULP
Cluster: Lichtenberg

Publications

M. Sadowski, L. Koch, K. Albe and S. Sicolo, “Planar gliding and vacancy condensation:
The role of dislocations in the chemomechanical degradation of layered transition metal
oxides”, Chemistry of Materials 2023 35 (2), 584-594 https://doi.org/10.1021/acs.chemmater.2c03069